The use of steel shear walls in building, retrofitting and reinforcing buildings is rapidly expanding due to advantages such as low cost construction, quick installation, high energy absorption potential and good behavior. The idea of ​​the use of steel shear walls, as a barrier-resistant system in designing and reinforcing buildings, has been considered by researchers and designers for more than three decades. The advantages of this high-energy ductility and absorption system, high shear hardness compared to other resistant systems, good buckling and buckling behavior can be mentioned. Steel shear walls are used in hard and hard form. In the hardened form it is prevented from buckling before it starts. While in the other type, the buckling occurs quickly, so that the capacity of the wall can be ignored before buckling. The results of this study indicate that the steel shear wall has many advantages. The advantages of using shear walls can be summarized as follows: a dramatic increase in the stiffness of the building, which has a significant effect on the secondary effects. This advantage in itself increases the level of safety against collapse or collapse of the building. Significantly reduced damage to non-structural elements, which in most cases cost less than the cost of a member of the instrument.