Today, high-rise buildings with a wall-wall are more acceptable in the construction world.
Considering the number and location of plastic joints in this type of building is important
For this reason, research has been conducted to examine the function of a wall-mounted building for a three-dimensional theory
The building (13 and 16, 20 floors) is considered. These buildings are under seven accelerates that are from the base,
Peer have been extracted and have been scaled in Seismosignal software under the Historical Analysis of Time
Nonlinear, have been analyzed. To the joints of the joints of the fibers and to the linear elements of the beam and joints
PMM involvement is dedicated. After analysis of buildings, the ratio of drainage, the period of plastic joints
The wall thickness, the amount of anchorage of the plastic joints in the wall and the axial load of the plastic joints under acceleration
Mapping has been investigated. The results of the analysis show that the amount of drainage ratio with increasing number
The floors increase by 13% in the building of 20 floors compared to the 13th floor building. also
The amount of anchor and axial force in the plastic joints in the first floor is the highest, but the amount of joints
Plastic in the upper floors of the building is the highest and increases by increasing the number of floors by 21%.